Loading Events

Past Events › Webinars

Events Search and Views Navigation

Event Views Navigation

August 2019

Configuring Data Wizard from the CIM Project Suite to automate project legends

August 27, 2019 at 12:00 pm - 1:00 pm CDT

Data Wizard creates project-specific legends and quantity takeoffs of all AutoCAD and Civil 3D point, line and area-type objects. This webinar will look at properly configuring Data Wizard to work for your company standards.

 

Learning Objectives:

  • Learn to configure your template so automatic legend creation is possible
  • Understand how Data Wizard scans for data and sizes it in a legend
  • Learn different use cases for a variety of table types and Excel exports
  • Understand how to build a set of Data Wizard templates to allow end users quick use of the tool and your settings
Register Here

Details

Date:
August 27, 2019
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , ,

Uncover the most popular tools of BIM Project Suite

August 29, 2019 at 12:30 pm - 1:30 pm CDT

Join SolidCAD’s Technical Specialist, Lichu Chen as she uncovers the most popular tools of the BIM Project Suite.

Learning Objectives:

  • Renumbering; Get a fast and simple way to renumber your rooms and doors. Auto-swapping avoids duplicates. Alphanumeric sequential numbering. Add separators and suffices to room and door numbers.
  • View Creator; This Revit add-in enables users to quickly and consistently create views in their projects. Create Plan and RCP views by selecting combinations of levels, view templates and phases.
  • Spreadsheet Link; Spreadsheet Link exports data from Revit elements to a spreadsheet where the data can be edited and then imported and applied back in to the Revit model.
  • Schedule XL; Learn how Schedule XL allows you to create schedule views from one or more worksheets in one or more spreadsheets.
Register Here

Details

Date:
August 29, 2019
Time:
12:30 pm - 1:30 pm
Event Categories:
, , , , , , , ,

September 2019

Introduction to Project Cleaner from the BIM Manager Suite

September 4, 2019 at 12:00 pm - 1:00 pm CDT

When working through general project cleanup, there are many tedious tasks. Deleting unused views, removing imports, cleaning working schedules… The list goes on. Instead of doing this all manually, perhaps a free tool that can help automate this process. These are certainly tasks we all should be doing in project models on a regular basis, and when sending models to others, or receiving model from others. But who has the time to do this without some kind of automation. This webinar will demonstrate how Project Cleaner can speed up this task for free with a simple to use toolset.

Learning Objectives:

  • Accessing Project Cleaner
  • Introduction to Interface
  • Generating View Selection
  • How to Obtain the Suite
Register Here

Details

Date:
September 4, 2019
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , ,

Quantity takeoffs with Data Wizard from the CIM Project Suite

September 10, 2019 at 12:00 pm - 1:00 pm CDT

Data Wizard creates project-specific legends or quantity takeoffs of all AutoCAD and Civil 3D point, line and area-type objects. This webinar will look at the case of generating project quantity takeoffs on one or more drawings.

Learning Objectives:

  • Learn to create project-specific quantity takeoffs from AutoCAD
  •  Learn to create project-specific quantity takeoffs from Civil 3D
  •  Understand how to table results in AutoCAD or export to Excel
  • Learn to format your QTO reports to give just the data you need
Register Here

Details

Date:
September 10, 2019
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , ,

Introduction to View Creator from the BIM Project Suite

September 11, 2019 at 12:00 pm - 1:00 pm CDT

Generating view in project setup can be a pain, but is necessary on nearly every project. This is especially true when dependant floor plans are necessary. This of course seems like it is more and more often. Other view management tasks like level or phase specific schedule creation are also tedious and happen throughout the project lifecycle. This webinar will demonstrate how View Creator can help minimize the tedium and standardize the creation and management of many view types.

Learning Objective:

Accessing View Creator
Introduction to Interface
Generating Views En Masse
How to Obtain the Suite

Learning Objectives:

  • Accessing View Creator
  • Introduction to Interface
  • Generating Views En Masse
  • How to Obtain the Suite
Register Here

Details

Date:
September 11, 2019
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , ,

Introduction to BIM Manager Suite

September 12, 2019 at 12:30 pm - 1:30 pm CDT

Join SolidCAD and CTC’s Shawn Zirbes and explore how the BIM Manager Suite contains extremely powerful tools designed to help BIM managers improve the efficiency, accuracy and depth of BIM management tasks. The intuitive interfaces and workflow-based processes of each tool can eliminate hours of tedious BIM management work with each use. This presentation will discuss and lightly demonstrate some of the key functionality.

Learning Objectives:

  • How to obtain the Suite
  • Discussion of Suite Deployment
  • Identification of Free vs Licensed Tools
  • Description of Popular
Register Here

Details

Date:
September 12, 2019
Time:
12:30 pm - 1:30 pm
Event Categories:
, , , , , , ,

Introduction to Renumbering from the BIM Project Suite

September 18, 2019 at 12:00 pm - 1:00 pm CDT

Anytime a renumbering of rooms, doors and views needs to happen, we all grumble a bit. It is not a fun task and is often filled with frustration. The free Renumbering tool from CTC Software can help eliminate the frustration and make renumbering many things a simple task where users only have to decide order of renumbering, but do not need to participate in mindless data entry for multiple views or elements in the model. Find out how renumbering tasks can be streamlined with a free tool in this webinar.

Learning Objectives:

  • Accessing Renumbering
  • Introduction to Interface
  • Executing Renumbering Processes
  • How to Obtain the Suite
Register Here

Details

Date:
September 18, 2019
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , ,

Introduction to CIM Manager Suite

September 24, 2019 at 12:00 pm - 1:00 pm CDT

Civil 3D and AutoCAD production management staff will greatly benefit from the CIM Manager Suite. Tools for automated Styles, Layer, and Linetype creation and editing will make supporting production teams easier than ever before. This webinar will go over the entire suite of tools in the CIM Manager Suite.

 

Learning Objectives:

  • Speed up template Layer and Object Layer Settings management though dynamic spreadsheet syncing
  • Improve template management with automated annotation and Civil 3D styles tracking and replacing
  • Automate Description Key Set and Figure Prefix DB management through spreadsheet syncing
  • Easily create and edit Linetypes without dealing with tedious .lin files
Register Here

Details

Date:
September 24, 2019
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , ,

Uncover the most popular tools of BIM Manager Suite

September 24, 2019 at 12:30 pm - 1:30 pm CDT

Join SolidCAD’s Technical Specialist, Drew Jarvis on September 24 at 10:30 AM PST/1:30 PM EST as he uncovers the most popular and favorite tools of the BIM Manager Suite.

Learning Objectives:

  • Dimension Checker; A tool created to identify dimension strings using the dimension override options and presents for review. Learn more on how additional filter options can be used to narrow the search results.
  • Family Checker; A tool developed with established criteria that allows you to validate families in a project or run on batches of family files at any time. Learn how you can check many factors such as parameter naming, geometric constraints, embedded CAD use, file sizes and more.
  • Type Swapper; Swapping types, and even families, is no longer a time-consuming process when using Type Swapper. Discover the simplicity of identifying and deleting duplicates
  • Schedule Parameter Resolver; Schedule Parameter Resolver makes it fast and easy to synchronize multiple schedules with the right parameter information by changing the parameter definitions in the schedule to match the parameters used in families within the project, without losing the schedule formatting.
Register Here

Details

Date:
September 24, 2019
Time:
12:30 pm - 1:30 pm
Event Categories:
, , , , , , , ,

October 2019

Introduction to Dimension Checker from the BIM Manager Suite

October 2, 2019 at 12:00 pm - 1:00 pm CDT

Discovering dimension override issues in models can be tricky. Sadly, there is no native way in the Revit interface to identify all dimension that have overrides. Also, there are some pretty dirty techniques that can be used to generate dimension overrides for construction documentation that can cause some significant coordination errors between the model and the documentation. This webinar will demonstrate how these issues can be discovered so responsible (or irresponsible) parties can be made aware of the issues and work to repair them.

Learning Objectives:

  • Accessing Dimension Checker
  • Introduction to Interface
  • Discovery of Dimension Overrides
  • How to Obtain the Suite
Register Here

Details

Date:
October 2, 2019
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , ,

Quickly create a new Civil 3D template with the CIM Manager Suite

October 8, 2019 at 12:00 pm - 1:00 pm CDT

Civil 3D template creation and editing can be a tedious process. Not with the CIM Manager Suite though. This webinar will cover a suite of tools that allow you to create a Civil 3D template in a fraction of the time it would otherwise.

Learning Objectives:

  • Speed up template Layer and Object Layer Settings creation though dynamic spreadsheet syncing
  • Quickly tweak settings in your template with automated annotation and Civil 3D styles tracking and replacing
  • Automate Description Key Set and Figure Prefix DB creation through spreadsheet syncing
  • Easily create and edit Linetypes without dealing with tedious .lin files
Register Here

Details

Date:
October 8, 2019
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , ,

Introduction to Family Exporter from the BIM Batch Suite

October 16, 2019 at 12:00 pm - 1:00 pm CDT

Unfortunately the default capabilities in native Revit allowing saving of families out of a Revit project model are basic and unfriendly. This CTC Software webinar will demonstrate how leveraging the free Family Exporter enables saving families out of a project easily and results in organized exports. No longer will families have to be saved one by one, or result in all families dumped into a single unorganized folder. Now you have control in an elegant tool that saves you time and frustration.

Learning Objectives:

  • Accessing Family Exporter
  • Introduction to Interface
  • Configuration of Export Settings
  • How to Obtain the Suite
Register Here

Details

Date:
October 16, 2019
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , ,

Manage your Civil 3D survey standards with Survey Template Manager from the CIM Manager Suite

October 23, 2019 at 12:00 pm - 1:00 pm CDT

Maintaining your survey standards in your Civil 3D template can be painstaking work. With the Survey Template Manager from the CIM Manager Suite we can quickly and easily edit our survey standards, such as survey codes, Layers, Description Keys, and Figure Databases.

Learning Objectives:

  • Learn to make changes to survey template standards in a fraction of the time it normally takes
  • Edit your Description Keys and Figure Prefix DB's in Excel then sync to Civil 3D
  • Learn to automate Layer and Style creation with the Survey Template Manager
  • Avoid dealing with the tedious editing interfaces in Civil 3D and instead sync from Excel
Register Here

Details

Date:
October 23, 2019
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , ,

Introduction to Fire Rating from the BIM Project Suite

October 30, 2019 at 12:00 pm - 1:00 pm CDT

The process of generating a fire rating in a Revit model can be varied and frustrating. The creation of graphics has options but sadly, many trade offs and often the process is very manual. This webinar will discuss a strategy that can automate the creation and maintenance of the fire rating/Life Safety plans. Join us to discover how this process can save time and generate consistent graphics with little effort.

Learning Objectives:

  • Accessing Fire Rating
  • Introduction to Interface
  • Execute Graphic Creation
  • How to Obtain the Suite
Register Here

Details

Date:
October 30, 2019
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , ,
Website:
https://attendee.gotowebinar.com/register/5233661456473299457

November 2019

Starting a New Project with the CTC Express Tools

November 6, 2019 at 12:00 pm - 1:00 pm CST

One of the main reason for the development of the CTC Express tools is to save us time performing regular tasks. In this webinar, we will show you how you can start new projects in Revit using a handful of tools from CTC Software.

Learning Objectives:

  • How to use HIVE to store your templates and start the initial project file.
  • How to use View Creator to create all of the levels, plans and areas.
  • Using Spreadsheet link to create your sheet list.
  • How to use Import & Link Manager to reload Revit links.
Register Here

Details

Date:
November 6, 2019
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , ,

Minnesota Revit Users Group Meeting

November 6, 2019 at 6:00 pm - 8:00 pm CST

The Minnesota Revit Users Group (MNRUG) has been connecting Revit users for over 10 years. Our goal is to connect power users and AEC industry influencers to share workflows and best practices in order to build a smarter and more efficient Revit community in Minnesota.

Location: CTC Software, 8101 34th Ave S, Suite #110, Bloomington, MN 55425

Itinerary:
6:00 – Doors Open
6:10 – Welcome
6:15 – Evening’s Topic: Content Management
7:15 – Future Session Planning
7:30 – Socialization

Pizza, soda & beer provided

 Register for MN Revit Users Group Meeting

Details

Date:
November 6, 2019
Time:
6:00 pm - 8:00 pm
Event Categories:
, , , , , ,
Website:
https://mnrug.com/events/

Productivity tools for surveyors in Civil 3D

November 13, 2019 at 12:00 pm - 1:00 pm CST

Even with the broad set of tools available in Civil 3D, survey users often get overlooked. Check out this webinar to learn about productivity tools created specifically for suveyors. We’ll cover data processing solutions from the CIM Project Suite, as well as standards optimization tools in the CIM Manager Suite.

Learning Objectives:

  • Learn to quickly prep data for construction staking.
  • Speed up data importing processes, including how to deal with multiple survey code sets.
  • Generate project-specific legends, showing only what was surveyed.
  • Clean up Civil 3D templates with ease using the Survey Template Manager.
Register Here

Details

Date:
November 13, 2019
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , , ,

Running Code Calculations using CTC Express Tools, Part 1

November 14, 2019 at 12:00 pm - 1:00 pm CST

Traditionally, running building code calcs are a manual process and one that happens outside of the Revit environment. Information from the model is needed for the calcs, and the resulting info is needed in the model. This two part webinar series will highlight a process that uses a couple of tools from the CTC Express Tools product line to calculate occupants, egress data, and plumbing fixture data and present that information directly in the Revit model with links to update when the building changes.

Learning Objectives:

  • Use Spreadsheet Link to calculate Occupancy Data
  • Use Spreadsheet Link to calculate Egress Requirements
  • Use Spreadsheet Link to calculate Plumbing Fixtures
  • Use Occupancy Flow Analyzer to Validate the Calcs from Excel
Register Here

Details

Date:
November 14, 2019
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , ,

Autodesk University in Las Vegas

November 19, 2019 - November 21, 2019

Come see CTC Software at booth #AE414!

The latest HIVE updates will be on display along with knowledgeable representatives to answer any questions you might have.

Enjoy 3 days packed with insights, learning, networking, and fun. Includes 700+ classes, General Session, Industry Keynotes, social events, meals, and Expo access.  We look forward to seeing you there!

Register Here

Organizer

Autodesk

Running Code Calculations using CTC Express Tools, Part 2

November 27, 2019 at 12:00 am - 1:00 pm CST

Traditionally, running building code calcs are a manual process and one that happens outside of the Revit environment. Information from the model is needed for the calcs, and the resulting info is needed in the model. This 2 part webinar series will highlight a process that uses a couple of tools from the CTC Express Tools product line to calculate occupants, egress data, and plumbing fixture data and present that information directly in the Revit model with links to update when the building changes.

Learning Objectives:

  • Use Spreadsheet Link to calculate Occupancy Data
  • Use Spreadsheet Link to calculate Egress Requirements
  • Use Occupancy Flow Analyzer to Validate the calcs from Excel
  • Use Occupancy Flow Analyzer to define Egress Paths, Shortest Distance
Register Here

Details

Date:
November 27, 2019
Time:
12:00 am - 1:00 pm
Event Categories:
, , , , , , ,

December 2019

Introduction to Type Swapper from the BIM Manager Suite

December 4, 2019 at 12:00 pm - 1:00 pm CST

Invariably, type definitions that interrupt our modeling standards make their way into our design models. Finding and correcting these deviants can be quite difficult and time consuming. Reduce the time it takes to manage the variations, bringing the model back into standards compliance far more efficiently. Join us as we discuss making model management easier in your firm.

Learning Objectives:

  • Accessing Type Swapper
  • Introduction to Interface
  • Repair Models Interactively
  • How to Obtain the Suite
Register Here

Details

Date:
December 4, 2019
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , ,

Productivity tools for road projects in Civil 3D

December 11, 2019 at 12:00 pm - 1:00 pm CST

From corridor modeling to sheet production, road projects are at the heart of Civil 3D. However, many toolsets are difficult to work with. Check out this webinar to learn better ways to manage corridors and speed up sheet production with the CIM Project Suite from CTC.

Learning Objectives:

  • Create better corridors and speed up editing processes.
  • Save hours by automatically updating plan and profile sheets when projects change.
  • Create sheet tables with automatic scanning of objects in a viewport.
Register Here

Details

Date:
December 11, 2019
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , , , ,

Introduction to Project Snapshot Exporter from the BIM Data Suite

December 18, 2019 at 12:00 pm - 1:00 pm CST

The Snapshot Exporter in the BIM Data Suite by CTC Software is designed to unlock the power of Information Modeling. This webinar will both discuss how the information can be captured, and demonstrate one example of how it can be represented in a Microsoft Power BI report.

Learning Objectives:

  • Accessing Project Snapshot Exporter
  • Introduction to Interface
  • Analyzing Project Snapshot Data
  • How to Obtain the Suite
Register Here

Details

Date:
December 18, 2019
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , , ,

January 2020

Introduction to Model Compare from the BIM Project Suite

January 2 at 12:00 pm - 1:00 pm CST

Exchanging models between architects and engineers on a project can be ripe with issues. Who changed what when? Did this thing actually change? How? The Model Compare tool is designed to assist in the identification of change so design and engineering can flow with fewer interruptions. Join us for this webinar where we demonstrate the power and possibilities of easier model change identification.

Learning Objectives:

  • Accessing Model Compare
  • Introduction to Interface
  • Execute Comparison Between 2 Models
  • How to Obtain the Suite
Register Here

Details

Date:
January 2
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , ,

Productivity solutions for site designers in Civil 3D

January 8 at 12:00 am - 1:00 pm CST

Site development projects often fall through the cracks when it comes to Civil 3D. That changes with this webinar. From utility design to sheet production, this webinar will showcase site development workflows with the CIM Project Suite from CTC.

Learning Objectives:

  • Design and edit storm and sanitary networks in a fraction of the time.
  • Automate sheet tables and quantification across all Autocad and Civil 3D objects.
Register Here

Details

Date:
January 8
Time:
12:00 am - 1:00 pm
Event Categories:
, , , , , , , ,

Beef Up Quality Assurance, Troubleshooting and Automation in Revit®

January 9 at 12:00 pm - 1:00 pm CST

During this webinar with ATG Technical Specialist Patrick Podeyn, attendees will learn how to use the CTC Express Tools™ to find and catch dimension faking before it causes issues in their projects. They will also discover how to automate room occupancy calculations, create sheets and copy data from one parameter to another. Additionally, attendees will explore how to find elements that are hiding in views and learn why they were hidden and how to avoid repeating that situation in the future.

Learning Objectives:

  • Show and select those specific dimensions and deem them as "okay" or "we need to correct this"
  • Discover dimensions that have been "faked" to show incorrect values
  • Automate room occupancy calculations
  • Copy data from parameter to parameter and find hidden elements
Register Here

Renumber Rooms and Doors More Quickly with this Workflow Inside the BIM Project Suite™

January 9 at 2:00 pm - 3:00 pm CST

We all know that renumbering rooms is both time-consuming and frustrating. Further, once you are finished with the rooms, you have to renumber the doors. In this webinar, users will look at two tools to help make these tedious tasks much easier using the BIM Project Suite. Join ATG Technical Specialist Brian Weeks for this walkthrough.

Learning Objectives:

  • Review the OOTB method of renumbering rooms and doors
  • Discover the fastest way to renumber your rooms and doors
  • Understand how to input formulas to match door numbers and room names
Register Here

Introduction to Quick Select from the BIM Project Suite

January 15 at 12:00 pm - 1:00 pm CST

Sometimes selecting elements in the model can be frustrating. Revit, sadly, doesn’t allow you to select elements based on their instance properties. It only allows selecting all instances of a certain type. What if you need to filter selections down by some parameter like level association or height or offset? This selection process can be tedious without tools to assist. This webinar will demonstrate a free tool to assist you in this exact process, making it easier than ever before.

Learning Objectives:

  • Accessing Quick Select
  • Introduction to Interface
  • Generate Selection Based on Parameters
  • How to Obtain the Suite
Register Here

Details

Date:
January 15
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , ,

Making Your Families Healthy

January 16 at 12:00 pm - 1:00 pm CST

It can be very difficult and time-consuming to validate the quality and functionality of Revit® family files when they come from different sources. Having inconsistent families that were created to different standards causes frequent issues in projects. Join ATG Technical Specialist Quentin Worm as he shows you how to very quickly analyze many aspects of entire libraries of Revit family files using CTC Express Tools™ to discover where the issues lie in your libraries.

Learning Objectives:

  • Learn how to navigate and conduct a family check
  • Learn about the different checklists created
  • Learn how to save reports
  • Learn how to correct problems in your families
Register Here

The Power of Schedules in the MEPPP™

January 16 at 2:00 pm - 3:00 pm CST

The Mechanical Electrical Plumbing Productivity Pack™ is the premier content pack on the market today for MEP users in Revit®. It was specifically created for companies who are designing/working in both the mechanical and electrical disciplines. With the MEPPP, project setup time is decreased by utilizing a comprehensive project organization. Join ATG Technical Specialist Zach Rico for this webinar as he walks you through the MEPPP with schedules that are already set up, and the ability to create new ones tailored for your specific needs.

Learning Objectives:

  • Explore what data is already predefined in the MEPPP schedules
  • Discover which parameters can pull data
  • • Learn how to set up a new schedule for your own use
Register Here

Better sheet production tools in Civil 3D

January 21 at 12:00 pm - 1:00 pm CST

Many Civil 3D tools allow for quick modeling and drafting. However, when it comes to creating and editing sheets, slow and tedious processes rule the day. Join us for this webinar to learn faster workflows and solutions for sheet production and editing.

Learning Objectives:

  • Automate sheet tables and quantification across all Autocad and Civil 3D objects.
  • Save hours by automatically updating plan and profile sheets when projects change.
Register Here

Details

Date:
January 21
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , , ,

Project-Wide QTO With The CTC Data Wizard

January 23 at 2:00 pm - 3:00 pm CST

Learn how to create project-specific Legends and quantity takeoffs of both AutoCAD and Civil 3D objects. Data Wizard will scan one or more drawings for all point, line and/or area-type objects and create a dynamic AutoCAD Table, including text and symbols that’re typically shown. Objects can include blocks, cog & survey, points, multi-leaders, hatches, lines, 2D & 3D polylines, survey figures, feature lines, parcel segments and alignments. Watch as ATG Technical Specialist Frank Diemert explains all of this and more.

Learning Objectives:

  • Create a project-specific Legend and quantity takeoff of both AutoCAD and Civil 3D objects
  • Scanning one or more drawings for all point, line and/or area-type objects and create a dynamic AutoCAD Table, including text and symbols that're typically shown
  • Show how Legend and quantify takeoff settings can be saved in different templates for quick and easy execution by end users
Register Here

Introduction to Family Tools from the BIM Manager Suite

January 29 at 12:00 pm - 1:00 pm CST

There are a number of tedious processes in the creation and maintenance of families. The Family Tools allow you to simplify a few of those steps. For a free tool, Family Tools has a lot of productivity gains. Join us in a webinar where we will cover some of the main features including family version detection and backup cleanup.

Learning Objectives:

  • Accessing Family Tools
  • Introduction to Interface
  • Executing General Content Maintenance
  • How to Obtain the Suite
Register Here

Details

Date:
January 29
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , ,

Revit® Mechanical Systems with the MEPPP in VDC

January 30 at 12:00 pm - 1:00 pm CST

MEP Technical Specialist Joe Levija will discuss taking the existing mechanical Revit® model and applying MEPPP content to it and setting up that model for your VDC project.

Learning Objectives:

  • Show how grouped families provide significant reduction in modeling time for plumbing layouts
  • Discuss what to transfer with "Transfer Project Standards"
  • Discuss content to load into the project
  • Explore what can be purged out of the engineers' model
Register Here

HIVE- What’s All The Buzz About?

January 30 at 2:00 pm - 3:00 pm CST

HIVE is a true content management system. BIM managers and drafters alike can benefit from knowing where and what content is appropriate without spending inordinate amounts of time teaching locations and complicated reasons where and why something is done. Use HIVE to simplify workflows and all of the confusion to become more productive.

Learning Objectives:

  • Tagging- rate and tag content for feedback from users
  • Content browsing- Find content with partial wording or by keywords across multiple libraries
  • Searching/metadata- find elements and projects via metadata
  • Save searches- reuse searches from previous searches
Register Here

February 2020

Productivity tools for storm and sanitary design in Civil 3D

February 4 at 12:00 pm - 1:00 pm CST

Pipe Networks in Civil 3D are a great toolset for storm and sanitary design. However, editing your designs is often a tedious process. Learn how to design and edit pipe networks with design-oriented workflows using the CIM Project Suite from CTC.

Learning Objectives:

  • Design entire pipe runs as though they are one smart model.
  • Quickly manage part data across pipe networks for easy tabling and annotation.
  • As designs change, quickly change out sizes and types across an entire network.
Register Here

Details

Date:
February 4
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , , ,

Introduction to Civil 3D CIM Tools from SolidCAD

February 5 at 1:30 pm - 2:30 pm CST

Out-of-the-box Civil 3D in some cases is missing key features and functionalities, which can be frustrating and time consuming. With the Civil 3D CIM Tools, new from SolidCAD, all that changes. Our goal is to streamline your use of Civil 3D and automate tedious tasks. From pipes to grading, corridors to survey and sheet production to CAD management, using Civil 3D just got a whole lot better with these productivity tools.

Learning Objectives:

  • Learn about design-oriented applications, helping everyday users do their jobs more effectively.
  • Quickly implement new workflows that fill the gap in common Civil 3D shortcomings.
  • Manage Civil 3D templates more effectively with style, layer and other standards editing tools.
Register Here

Details

Date:
February 5
Time:
1:30 pm - 2:30 pm
Event Categories:
, , , , ,
Website:
http://attendee.gotowebinar.com/register/6613007591773098253

Productivity Tools for Site Design in Civil 3D

February 11 at 12:00 pm - 1:00 pm CST

Site development projects often fall through the cracks when it comes to Civil 3D. From utility design to sheet production, this webinar will showcase site design workflows in Civil 3D with the CIM Project Suite from CTC.

Learning Objectives:

  • Automate sheet tables and quantification across all AutoCAD and Civil 3D objects.
  • Design and edit storm and sanitary networks in a fraction of the time.
Register Here

Details

Date:
February 11
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , ,
Website:
https://attendee.gotowebinar.com/register/2896421894962204161

Introduction aux outils CIM Civil 3D de SolidCAD

February 13 at 9:00 am - 10:00 am CST

Dans certains cas, Civil 3D de base ne contient pas les principales caractéristiques et les fonctionnalités requises pour le bon fonctionnement du logiciel. Ce qui peut être long et extrêmement frustrant pour les utilisateurs. Grâce aux outils CIM Civil 3D, une toute dernière nouveauté de SolidCAD, tout cela changent. Notre objectif est d’optimiser votre utilisation de Civil 3D et d’automatiser les tâches longues et répétitives. Des canalisations aux talus, de la modélisation des projets 3D aux travaux d’arpentage, de la mise en page à la gestion D.A.O., l’utilisation de Civil 3D s’améliore beaucoup avec ces outils de productivité.

Learning Objectives:

  • En savoir plus sur les applications orientées sur la conception, permettant aux utilisateurs de faire leur travail plus efficacement aux quotidiens
  • Implémentez rapidement de nouvelles méthodes de travail qui comblent les lacunes courantes de Civil 3D.
  • Gérez plus efficacement les modèles Civil 3D avec le style, le calque et d’autres outils d’édition standard.
Register Here

Details

Date:
February 13
Time:
9:00 am - 10:00 am
Event Categories:
, , , , ,
Website:
https://fr.solidcad.ca/event/introduction-aux-outils-cim-civil-3d-de-solidcad/

Productivity Tools for Civil 3D CAD Managers

February 18 at 12:00 pm - 1:00 pm CST

Civil 3D and AutoCAD production management staff will benefit from the CIM Manager Suite. Tools for automated Styles, Layer and Linetype creation and editing will make supporting production teams much easier than ever before. This webinar will go over the entire suite of Productivity Tools for Civil 3D CAD Managers in the CIM Manager Suite from SolidCAD.

Learning Objectives:

  • Speed up template Layer and Object Layer Settings management though dynamic spreadsheet syncing.
  • Improve template management with automated annotation and Civil 3D styles tracking and replacing.
  • Automate Description Key Set and Figure Prefix Database management through spreadsheet syncing
  • Easily create and edit Linetypes without dealing with tedious .lin files
Register Here

Details

Date:
February 18
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , ,
Website:
https://attendee.gotowebinar.com/register/3819631231377873153

Introduction to Project & Family Upgrader from the BIM Batch Suite

February 20 at 12:00 pm - 1:00 pm CST

Typically when users move to a newer version of Revit® it is highly desirable to upgrade their family libraries to the new version. This usually happens about once per year. It can also be desirable to upgrade projects and all of the dependent links to the new version as well. In both cases this process can be extremely time consuming and tedious. Projects often have to be handled manually because there can be unforeseen steps, and the Autodesk script for family upgrades rarely is successful for more than 50 families.

The Projects & Families Upgrader from CTC Software can help automate this process, saving time and frustration when upgrades are necessary. This webinar will discuss the workflow and options that you can leverage to make your upgrade process as streamlined and as fast as possible.

Learning Objectives:

  • Accessing Project & Family Upgrader
  • Exploring the user interface
  • Planning project and link upgrades
  • Acquiring the software
Register Here

Details

Date:
February 20
Time:
12:00 pm - 1:00 pm
Event Categories:
, , , , , , ,

+ Export Events

Suggest a Mini-Training Topic Here